R1.124

Reference R1 12″ Dual 4-ohm Subwoofer, 850w RMS

RMS Power (watts) 850
Efficiency (1w/1m) 83.1
Voice Coil Configuration 2.5″ DVC 4Ω

Categoría:
  • Descripción
  • Specifications
  • Support

Descripción

  • Die-Cast Aluminum Soundstream Reference R1 Frame
  • Oversaturated Motor Sturcture for Increased Magnetic Strength
  • 12mm Vented T-Yoke & Top Plate Improve Low Frequency Dynamics
  • 317oz Double Stack Magnet, T-Yoke & Top Plate
  • 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power Handling
  • High-Temperature Tollerance Adhesives Resist Thermal Failure
  • Inverted Roll Polyether Foam Surround w/ UV & Chemical Protection
  • Oversized Concave IMPP Primary Cone Increases Effective Surface Area
  • Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection
  • Acoustic Canceling Polyvinyl Chloride Gasket & Trim Ring
  • Nickel Plated 12ga Spring-Loaed Compression Wire Terminals
  • Stitched Voice Coil Leads Prevent Potential Damage
  • Dual Poly-Cotton Suspension Dampen Violent Accelerations
Acoustic Canceling Polyvinyl Chloride Gasket & Trim Ring
Aggressive, edgy styled, Poly Vinyl Composite sealer trim ring is as functional as it is beautiful. Matrix corrugations dampen unwanted resonances that can color the sound under high power conditions. Wrap around design creates a perfect seal for optimum in box performance.
Oversized Concave IMPP Primary Cone
High Output, deep bone crushing bass is a modest space. Oversized rigid cone and deep reverse roll surround create over 25% more effective piston area than conventional subwoofers in the same chassis size.
Oversized Concave IMPP Primary Cone
High Output, deep bone crushing bass is a modest space. Oversized rigid cone and deep reverse roll surround create over 25% more effective piston area than conventional subwoofers in the same chassis size.
2.5” 4-Layer Voice Coil w/ Acrylic Coating
To further extend the reliability of the R1, Soundstream spares no cost with precision drawn and acrylic coated voice coil wire that does not fall apart even under high power conditions.
Dual Poly-Cotton Suspension Dampen Violent Accelerations
For tight hard hitting deep percussive bass performance, the R1 features Dual Symmetric Dampers that precisely aligns the voice coil without wobble distortion common with single damper subwoofers.

 

SPECIFICATIONS R1.124
RMS Power (watts) 850
Efficiency (1w/1m) 83.1
Voice Coil Configuration 2.5" DVC 4Ω
Mounting Depth 7.875"
Optimum Sealed ft3 1.00
Optimum Ported ft3 2.00